Foxconn MARS English Manual. - Page 24

2 Front Panel Connector : FP1 This motherboard includes one connector for connecting the front panel switch and LED Indicators. Hard Disk LED Connector (HDD-LED) Connect to the chassis front panel IDE indicator LED. It indicates the active status of the hard disks. This 2-pin connector is directional with +/- sign. 12 + HDD-LED - + PWR-LED - RESET-SW PWR-SW NC EMPTY 9 10 FP1 Reset Switch (RESET-SW) Attach the connector to the Reset switch on the front panel of the case; the system will restart when the switch is pressed. Power LED Connector (PWR-LED) Connect to the power LED indicator on the front panel of the chassis. The Power LED indicates the system's status. When the system is in operation (S0 status), the LED is on. When the system gets into sleep mode (S1) , the LED is blinking; When the system is in S3/S4 sleep state or power off mode (S5), the LED is off. This 2-pin connector is directional with +/- sign. Power Switch Connector (PWR-SW) Connect to the power button on the front panel of the chassis. Push this switch allows the system to be turned on and off rather than using the power supply button. IrDA Connector : IR This connector supports infrared wireless transmitting and receiving device. 1 2 3 4 5 IR +5V EMPTY IRRX GND IRTX 12 1394a Connector : F_1394 The 1394a expansion cable can be connected to either the front (provided that the front panel of your chassis is equipped with the appropriate interface) or real panel of the chassis. TPA+ GND TPB+ +12V EMPTY TPAGND TPB- +12V GND 9 10 F_1394 Audio Connector : F_AUDIO The audio connector supports HD Audio standard. Front Audio supports re-tasking function. MIC_L MIC_R LINEOUT_R SENSE_SEND LINEOUT_L 12 AUD_GND PRESENCE_J SENSE1_RETURN EMPTY SENSE2_RETURN 9 10 F_AUDIO 17