Foxconn MARS English Manual. - Page 31

3 Standard CMOS Features This submenu is used to set up the standard BIOS features, such as the date, time, floppy drive and so on. Use the arrow up/down keys to select an item, then use the or keys to change the setting. Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Date (mm:dd:yy) Wed, Nov 7 2007 Time (hh:mm:ss) 17 : 44 : 13 ► SATA Channel 1 WDC WD2500JS-60NCB1 ► SATA Channel 2 None ► SATA Channel 3 Maxtor 6L250S0 ► SATA Channel 4 None ► SATA Channel 5 ST3320620SV ► SATA Channel 6 ST3300831AS ► IDE Channel Master ► IDE Channel Slave WNDonCeWD2500BB-22FTA0 None ► e-SATA Channel None Drive A 1.44M, 3.5 in. Video EGA/VGA Halt On All Errors BIOS ID P35A04.F1.P.09.MARS ▲ Item Help █ █ Menu Level Press [Enter] to enter █ next page for detail █ hard drive settings Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults ► Date - format Day-weekday from Sun. to Sat., automatically displayed by BIOS (Read Only). Month-month from 1 to 12. Date-date from 1st to 31st. Year-year, set up by users. Use , keys to select a field. Use , , or to select a value. ► Time - : : format This item allows you to configure the desired time. Use , to move forward and select a field. Directly input a value or use , , or to select a value. ► SATA Channel 1/2/3/4/5/6, IDE Channel Master/Slave, e-SATA Channel These categories identify the hard disks connected to the Intel® ICH9R and JMicron controllers in the system. In each channel's display, you can press [Enter] to go to its submenu. You can further configure specific drive settings. [None], [Auto], and [Manual]. "None" means no HDD is installed or set; "Auto" means the system can auto-detect the hard disk when booting up; by choosing "Manual" and changing Access Mode to "CHS", the related information should be entered manually. In Access Mode setting, selections of [CHS], [LBA], [Lage] and [Auto] can help you to select hard drive for legacy compatibility. 24