Foxconn MARS English Manual. - Page 43

3 PnP/PCI Configurations Phoenix - AwardBIOS CMOS Setup Utility PnP/PCI Configurations Init Display First PCI Slot Item Help Resources Controlled By x IRQ Resources Auto Menu Level ► Press Enter PCI/VGA Palette Snoop INT Pin 1 Assignment INT Pin 2 Assignment INT Pin 3 Assignment INT Pin 4 Assignment INT Pin 5 Assignment INT Pin 6 Assignment INT Pin 7 Assignment INT Pin 8 Assignment Disabled Auto Auto Auto Auto Auto Auto Auto Auto ** PCI Express relative items ** Maximum Payload Size 128 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults ► Init Display First This item is used to choose the initial display device which will be used first when your PC starts up. Options are : [PCI Slot] and [PCIEx]. ► Resources Controlled By This item is used to define the system resource control scheme. If all cards you use support PnP, then select [Auto] and the BIOS will automatically distribute interruption resources. If the PCI cards you installed need special IRQ resources, you will need to select [Manual] and manually adjust interruption resources in the event of hardware conflicts. ► IRQ Resources Press the key, then manually set IRQ resources. ► PCI/VGA Palette Snoop This option is only useful if you use an MPEG card or an add-on card that makes use of the graphics card's Feature Connector. It corrects incorrect color reproduction by "snooping" into the graphics card's frame buffer memory and modifying (synchronizing) the information delivered from the graphics card's Feature Connector to the MPEG or add-on card. It will also solve the problem of display inversion to a black screen after using the MPEG card. Feature Connector normally stays at top edge of the graphics card. ► INT Pin 1/2/3/4/5/6/7/8 Assignment This item is used to assign IRQ resources for INT Pin 1/2/3/4/5/6/7/8. Default INT Pin assignments can be found from the help menu. ***PCI Express relative items*** ► Maximum Payload Size This item is used to set maximum Transaction Layer Packets (TLP) payload size for PCI Express devices. The unit is byte. 36