Fujitsu 5110C Operator's Guide - Page 121

CONTENTS INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 7.1 Document Size 7.2 Document Quality 7.3 Maximum Document Loading Capacity 7.4 Area not to be perforated 7.5 Multi feed Detection Conditions 8 OPTIONS 9 SCANNER SPECIFICATIONS Appendix 7.2 Document Quality 1 2 Document Type The following paper types are recommended for document use: q Woodfree paper q Wood containing paper When using documents of paper type other than the above, check whether or not the document can be scanned by test-scanning a few sheets before executing the actual document. Document Thickness Paper thickness is expressed by "paper weight." The following shows the paper weights that can be used on this scanner: q 52 g/m2 to 127 g/m2 Only paper weight of 127 g/m2 is acceptable for A8-size documents. Precautions The following documents may not be scanned successfully: q Documents of non-uniform thickness (e.g. envelopes) q Wrinkled or curled documents (See HINT on next page) q Folded or torn documents q Tracing paper q Coated paper q Carbon paper q Carbonless paper q Photosensitive paper q Perforated or punched documents q Documents that are not square or rectangular q Very thin documents Do not use the following documents: q Paper-clipped or stapled documents q Documents on which the ink is still wet q Documents smaller than A8 (Portrait) in size q Documents wider than A4 or Letter size (216mm) q Documents other than paper such as fabric, metal foil, or transparencies 1 2