Fujitsu 5110C Operator's Guide - Page 76
Cleaning the Inside of the Scanner 3 - scanner review
UPC - 097564306075
View all Fujitsu 5110C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
CONTENTS INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 4.1 Cleaning Materials 4.2 Cleaning the Scanner Exterior 4.3 Cleaning the Inside of the Scanner 5 REPLACING CONSUMABLES 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 8 OPTIONS 9 SCANNER SPECIFICATIONS Appendix 4.3 Cleaning the Inside of the Scanner (3) 1 2 3 4 5 Turn off the scanner before cleaning the following locations. q Pad ASSY (x 1) Wipe the Pad ASSY (rubber surface) downwards. When cleaning the Pad ASSY, take care to prevent the cloth from catching on the metallic parts. Metallic parts The portion to clean q ADF glass surfaces (x 2: located on the ADF and the opposite side) Clean lightly. HINT If the glass is dirty, vertical black streaks may appear in the scanned images. q Plastic rollers (x 4) Clean them lightly while rotating the rollers with your finger. Take care not to roughen the surface of the rollers. Take particular care in cleaning the plastic rollers since black debris on the rollers adversely affect the pickup performance. q Pick roller (x 1) Lightly clean the Pick roller taking care not to scratch the roller surfaces and the Mylar sheet. Take particular care in cleaning this roller as black debris on it adversely affect the pickup performance. Mylar sheet With the movie below, review the procedure to clean the Pad ASSY, ADF glass surfaces, Plastic rollers and the Pick roller: