Fujitsu 5110C Operator's Guide - Page 90

CONTENTS INTRODUCTION 1 NAMES AND FUNCTIONS OF PARTS 2 BASIC SCANNER OPERATIONS 3 SCANNING VARIOUS TYPES OF DOCUMENTS 4 DAILY CARE 5 REPLACING CONSUMABLES 5.1 Consumable and Replacement Cycle 5.2 Replacing the Pad ASSY 5.3 Replacing the Pick Roller 6 TROUBLESHOOTING 7 DOCUMENT SPECIFICATIONS FOR ADF 8 OPTIONS 9 SCANNER SPECIFICATIONS Appendix 5.3 Replacing the Pick Roller (2) 1 2 3 8. Attach the new pick roller to the shaft. Insert the new pick roller aligning the protrusion with the slot on the pick roller. : Pick Roller Shaft : Protusion : Pick Roller ATTENTION Make sure that the Pick roller is completely attached. An incompletely attached Pick roller might cause document jams or other feedings errors. 9. Install the pick roller with its shaft to the scanner. Attatch the Pick roller to the scanner in reverse order of the procedure for removing. 10. Rotate the roller bushing by rotating it in the direction of the arrow. : Pick Roller Bushing : Pick Roller Shaft ATTENTION Make sure that the Pick roller is completely attached. An incompletely attached Pick roller might cause document jams or other feeding errors. 11. Attach the sheet guide to the scanner. Pinch the knobs on the sheet guide and attach it to the scanner. The sheet guide makes a clicking sound when the knobs fix into position. ATTENTION Make sure that the sheet guide is completely attached. Otherwise, document jams or other feeding errors may occur. 12. Close the ADF. You should hear the ADF click when it returns to its original position. 13. Attach the ADF paper chute.