HP 4410t HP 4410t Mobile Thin Client - Page 92
Choosing Multiboot preferences, Setting a new boot order in Computer Setup
UPC - 884962419915
View all HP 4410t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Choosing Multiboot preferences You can use MultiBoot in the following ways: ● To set a new boot order that the computer uses each time it is turned on, by changing the boot order in Computer Setup. ● To dynamically choose the boot device by pressing f9 while the "F9 = Boot device menu" message is displayed in the lower-left corner of the screen when the computer starts up. ● To use MultiBoot Express to set variable boot orders. This feature prompts you for a boot device each time the computer is turned on or restarted. Setting a new boot order in Computer Setup To set a boot device order that the computer uses each time it is turned on or restarted, follow these steps: 1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select System Configuration > Boot Options, and then press enter. 3. Use the arrow keys to select Enable in the MultiBoot field. NOTE: MultiBoot is enabled at the factory. 4. Use the arrow keys to select the order that you prefer in the Boot Order fields. 5. To save your preferences and exit Computer Setup, use the arrow keys to select File > Save changes and exit. Then follow the instructions on the screen. Your preferences go into effect when the computer restarts. Dynamically choosing a boot device using the F9 prompt To dynamically choose a boot device for the current start up sequence, follow these steps: 1. Open the Select Boot Device menu by turning on or restarting the computer, and then pressing f9 while the "F9 = Boot device menu" message is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select a boot device, and then press enter. Your preferences go into effect immediately. Setting a MultiBoot Express prompt To set the computer to display the MultiBoot startup location menu each time the computer is started or restarted, follow these steps: 1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select System Configuration > Boot Options, and then press enter. 82 Chapter 15 Multiboot