HP 4410t HP 4410t Mobile Thin Client - Page 96
Security menu, Diagnostics menu, System Configuration menu, Computer Setup
UPC - 884962419915
View all HP 4410t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Select Ignore changes and exit Save changes and exit To do this Cancel any changes entered during the current session and exit Computer Setup. Save any changes entered during the current session and exit Computer Setup. Your changes go into effect when the computer restarts. Security menu NOTE: Some of the menu items listed in this section may not be supported by your computer. Select Setup Password Power-On Password Password Options Smart Card Security System IDs To do this Enter, change, or delete a setup password. Enter, change, or delete a power-on password. ● Enable/disable stringent security. ● Enable/disable the password requirement on computer restart. Enable/disable smart cards. Enter a user-defined computer asset tracking number and ownership tag. Diagnostics menu Select Memory Check To do this Run a comprehensive test on system memory. System Configuration menu NOTE: Some of the listed System Configuration options may not be supported by your computer. Select Language (or press f2) Boot Options To do this Change the Computer Setup language. ● Set an f9, f10, and f12 delay when starting up. ● Enable/disable CD-ROM boot. ● Enable/disable floppy boot. ● Enable/disable internal network adapter boot and set the boot mode (PXE). ● Enable/disable MultiBoot, which sets a boot order that can include most boot devices in the system. 86 Chapter 16 Computer Setup