HP BladeSystem c3000 HP BladeSystem c-Class Enclosure Troubleshooting Guide - Page 18
HP BladeSystem c3000 Enclosure Insight Display action and verification, Step 3, Action, Verification
View all HP BladeSystem c3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Step Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 HP BladeSystem c3000 Enclosure Insight Display action and verification Action Verify the number of OA modules installed in the enclosure. Verification If only one OA module is installed in the enclosure, continue to step 6. If two OA modules are installed in the enclosure, continue to the next step. Action Identify the active OA module. Verification If the active OA LED is illuminated on the left OA module (OA1), then reseat the left OA module. Continue to the next step. If the active OA LED is illuminated on the right OA module (OA2), then continue to step 6. Action Wait for at least one minute, and then verify the status of the Insight Display. Verification If the Insight Display illuminates after one minute, the repair is complete. If the Insight Display does not illuminate after one minute, then continue to the next step. Action Reseat the OA tray: 1 Remove the OA modules from the OA tray. 2 Remove the OA tray. 3 Install the original OA modules in the OA tray. 4 Install the OA tray. 5 Wait for at least one minute, and then verify the status of the Insight Display. Verification If the Insight Display illuminates after one minute, the repair is complete. If the Insight Display does not illuminate after one minute, then continue to the next step. Action Replace the Insight Display. Wait for at least one minute, and then verify the status of the Insight Display. Verification If the Insight Display illuminates after one minute, the repair is complete. If the Insight Display does not illuminate after one minute, then continue to the next step. Action Replace the OA tray: 1 Remove the OA modules from the OA tray. 2 Remove the original OA tray. 3 Install the original OA modules in the OA tray. 4 Install the new OA tray. 5 Wait for at least one minute, and then verify the status of the Insight Display. Verification The repair is complete. HP BladeSystem Insight Display troubleshooting 18