HP BladeSystem c3000 HP BladeSystem c-Class Enclosure Troubleshooting Guide - Page 59
Procedures: KVM USB troubleshooting
View all HP BladeSystem c3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
The KVM monitor must support a minimum resolution of 1024x768 to operate properly with the c3000 KVM module. Step External KVM monitor troubleshooting action and verification Step 1 Step 2 Step 3 Action Connect the KVM monitor directly to a server blade VGA connector. Action Connect the KVM keyboard directly to the server blade USB connector. Action If the server blade is in screen-saver mode, press the Shift key. Verification If KVM monitor power LED is illuminated, and the video does not respond, then replace the monitor. If the external KVM monitor is operating properly, connect the monitor and keyboard directly to the c3000 KVM VGA and USB connectors. Continue to step1 of "Procedures: KVM Menu troubleshooting (on page 58)." Procedures: KVM USB troubleshooting CAUTION: Some troubleshooting procedures require powering down an entire enclosure. To avoid possible data loss, always secure permission before powering down an enclosure. CAUTION: To avoid data loss, do not remove an Onboard Administrator when the Insight Display shows a firmware update in progress. During this activity, the Insight Display displays the Firmware Update screen with the Lock icon and the firmware update progress bar. The KVM monitor must support a minimum resolution of 1024x768 to operate properly with the c3000 KVM module. Step KVM USB troubleshooting action and verification Step 1 Step 2 Action Connect to the DVD-ROM drive: 1 Use Insight Display to navigate to the Enclosure Settings screen. 2 Select DVD Connect. 3 Press the OK button. Verification If the Insight Display reports the status of all the server DVD-ROM drive connections, then continue to the next step. If the c3000 must be configured for either front or rear USB connectors, then do one of the following: • Connect the KVM USB keyboard and mouse to the USB connectors that the Insight Display indicates are connected. • Use the Insight Display to configure the USB connectors to the front or rear, as needed. Continue to the next step. Action 1 Connect the KVM keyboard to the KVM USB connector. 2 Press the KVM keyboard Print Screen key. Verification If the KVM screen displays the Enclosure KVM Menu screen, then the repair is complete. If the KVM screen does not display the Enclosure KVM Menu screen, then the KVM keyboard has failed and must be replaced. Enclosure troubleshooting 59