HP C3941A HP LaserJet 5L - Printer User's Manual - Page 70
Print Media Specifications
View all HP C3941A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Table B-1 Paper Specifications Acid Content Ash Content Basis Weight Brightness Caliper Curl Cut Edge Conditions Electrical Surface Resistivity Electrical Volume Resistivity Finishing Furnish (Composition) Fusing Compatibility Grain Moisture Content Opacity Packaging Smoothness Stiffness Wax Pick 5.5 pH minimum Not to exceed 10% Paper Output Bin: 16 to 28 pound bond (60 to 105 g/m2) Front Output Slot: 16 to 43 pound bond (60 to 163 g/m2) 83% minimum +/- 0.03 to +/- 0.08 in. (0.09 to 0.2 mm) In-ream: flat within 0.2 in. (5 mm) Cut with sharp blades, no visible fray. 2.0 to 15 x 1010 ohms/sq. (conditioned @ 23° C & 50% RH) 1.2 to 15 x 1011 ohms-cm (conditioned @ 23° C & 50% RH) Cut sheet to within 0.3 inch (0.8 mm) of nominal, 0.20° square. 100% chemical wood pulp and/or cotton fiber Must not scorch, melt, offset, or release hazardous emissions when heated to 392° F (200° C) for 0.1 second. Long grain 4% to 6% by weight 85% minimum Polylaminated moisture proof ream wrap. 100 to 250 (Sheffield) 1.6 minimum machine direction, 0.6 minimum cross direction (Taber) 12 minimum (Dennison) B-2 Print Media Specifications EN