HP C7770B HP Designjet 500 Plus - Pocket Guide - Page 106
Either, Enter, Cancel, Create pattern
UPC - 725184439704
View all HP C7770B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Message Explanation and Action Roll right edge too far from load line Press ENTER to retry Press CANCEL to abort During the loading of a roll of paper, the printer has detected that the paper is too far to the left; it should be aligned with the blue line painted on the right side of the platen. Either: Press the Enter key to restart the loading procedure; Or: Press the Cancel key to cancel paper loading. Sheet edge not found Please check sheet edges are non-clear Press ENTER to retry Press CANCEL to abort During the loading of a sheet, the printer cannot detect the side edge of the paper. A possible cause is that the media is transparent (clear); only non-clear media are supported. Either: Press the Enter key to restart the loading procedure; Or: Press the Cancel key to cancel paper loading. Sheet not loaded The printer is trying to perform a scan of the calibration pattern, but no sheet was Load sheet with printed pattern found. Load the sheet that was printed by the Create pattern part of the calibration routine. 42 Front-Panel Error Messages