HP C7770B HP Designjet 500 Plus - Pocket Guide - Page 86
Advance Calibration Routine
UPC - 725184439704
View all HP C7770B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Advance Calibration Routine It is important that the paper loaded for this calibration is exactly that used for normal printing, both in quality (for example, glossy paper) and in width (for example, A0 or 36-inch). Either roll or sheet paper can be used. The routine prints a pattern and then cuts the roll or ejects the sheet; it requires paper that is at least 65 cm long and at least 50 cm wide. You must then reload that piece of paper as a sheet, so that the printer can accurately measure the pattern, and make whatever adjustments are appropriate to the amount it advances between printing swaths of data. (See page 47, "Load a Sheet of Paper" on the reverse of this Pocket Guide.) The pattern printed is solely for the use of the printer; you are not expected to relate any of its characteristics to the quality of your images. 1 From the main front-panel menu, with the correct paper loaded, select the Paper menu ( ) and press Enter. 2 Select Advance calibration and press Enter. 3 Select Create pattern and press Enter. The printer prints its calibration pattern (as represented opposite) and cuts or ejects the paper. 22 Advance Calibration Routine