HP C7770B HP Designjet 500 Plus - Pocket Guide - Page 75
Unexpected or Wrong Output - network card
UPC - 725184439704
View all HP C7770B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
unexpected or wrong output Unexpected or Wrong Output • Check that the Processing HP-GL/2 or Processing PS messages in the front panel are as you expect them to be. • Ensure that your printer understands the graphic - Try installing extra memory in your printer- extra memory is installed on the formatter (accessory) card, for PostScript or HP-GL/2, that is installed at the back of the printer; - Check the interface cable between your computer and the printer; language you use. See → Graph. Lang. - Check the software settings for the page size. Typical problems are: • The print is completely blank - Try changing the → Graph. Lang setting. • The output contains only a partial print - Don't press Cancel or Form Feed and Cut before all the data is received by the printer; - Try increasing the → I/O Setup → I/O • The image is clipped - Check the printing area in your software and that on the printer; don't forget any margins; - Check the media orientation assumed by your software; check the → Page format → Rotate option; - Try installing extra memory in your printer's formatter card (see above). Timeout setting or any timeout setting in your network software; Unexpected or Wrong Output 11