HP C7770B HP Designjet 500 Plus - Pocket Guide - Page 38
Replacing Printheads
UPC - 725184439704
View all HP C7770B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Replacing Printheads Printhead Status If there is an error with one or more printheads, the printhead status is shown by four icons, referring from left to right to the Cyan (•), Black (•), Magenta (•) and Yellow (•) printheads. In this example, three of the printheads are OK but the magenta one is missing (the icon flashes). 1 To determine the status of the printheads, from the main front-panel menu, select Ink System ( ) and press Enter. In the second example, the magenta printhead is faulty (the cross flashes). If you identified a printhead as being faulty during the Troubleshooting routine (see page 16 on the reverse of this Pocket Guide), the icon shows a flashing exclamation mark. If the printer is unable to determine which of several printheads are faulty, the front panel shows three or four flashing question marks. 2 Select Information and press Enter. 3 Select Printheads and press Enter. You can then call up the information about any of the printheads by selecting it and pressing Enter. 38 Replacing Printheads