HP DL785 HP ProLiant DL785 G5 and G6 Servers - Maintenance and Service Guide, - Page 51
Tilt the board to avoid contact between the lower connectors and the chassis, and pull
UPC - 883585262809
View all HP DL785 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
CAUTION: When removing the midplane board do not allow the lower connectors to touch the chassis. Allowing the midplane board connectors to touch the chassis can damage the board. 10. Tilt the board to avoid contact between the lower connectors and the chassis, and pull the board out through the front of the server. To replace the component, reverse the removal procedure. Midplane board 51
CAUTION:
When removing the midplane board do not allow the lower connectors to touch
the chassis. Allowing the midplane board connectors to touch the chassis can damage the
board.
10.
Tilt the board to avoid contact between the lower connectors and the chassis, and pull the
board out through the front of the server.
To replace the component, reverse the removal procedure.
Midplane board
51