HP DL785 HP ProLiant DL785 G5 and G6 Servers - Maintenance and Service Guide, - Page 81
Specifications, Environmental specification
UPC - 883585262809
View all HP DL785 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
7 Specifications In this section • "Environmental specification" (page 81) • "Server specifications" (page 81) Environmental specification Specification Value Temperature range Operating Non-operating 10°C to 35°C (50°F to 95°F)1 -30°C to 60°C (-22°F to 140°F)2 Maximum wet bulb temperature Relative humidity (noncondensing)3 28°C (82.4°F) Operating 10% to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing. Non-operating 5% to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing. Altitude Operating 3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min). Non-operating 9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min). 1 10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 30°C (86°F). 2 Maximum rate of change is 20°C/hr (36°F/hr). 3 Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for storage corresponds to a pressure minimum of 70 KPa. Server specifications Specification Dimension Height Depth Width Weight (maximum1) Weight (minium2) Input requirement Rated input voltage Value 30.58 cm (12.04 in) 69.6 cm (27.4 in) 44 cm (17.32 in) 72 kg (160 lbs) 67 kg (147 lbs) Low line 100 - 120 V ac 90 - 132 V ac High line3 200 - 240 V ac 180 - 264 V ac Environmental specification 81