HP EliteDesk 705 G2 Maintenance and Service Guide - Page 13
Rear panel components, Line-In Audio Connector blue
View all HP EliteDesk 705 G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Rear panel components 1 PS/2 Mouse Connector (green) 7 PS/2 Keyboard Connector (purple) 2 Serial Connector 3 RJ-45 Network Connector 8 DisplayPort Monitor Connectors 9 VGA Monitor Connector 4 USB 2.0 Ports with Wake from S4 feature (black) 10 USB 3.0 Ports (blue) 5 Line-In Audio Connector (blue) 11 USB 2.0 Ports (black) 6 Power Cord Connector 12 Line-Out Connector for powered audio devices (green) NOTE: An optional second serial port and an optional parallel port are available from HP. If using a USB keyboard, HP recommends connecting the keyboard to one of the USB 2.0 ports with the wake from S4 feature. The wake from S4 feature is also supported on the PS/2 connectors if enabled in BIOS F10 Setup. When a device is plugged into the blue Line-In Audio Connector, a dialog box will pop up asking if you want to use the connector for a line-in device or a microphone. You can reconfigure the connector at any time by double-clicking the Audio Manager icon in the Windows taskbar. When a graphics card is installed in one of the system board slots, the video connectors on the graphics card and the integrated graphics on the system board may be used at the same time. However, for such a configuration, only the display connected to the discrete graphics card will display POST messages. The system board graphics can be disabled by changing settings in Computer Setup. Rear panel components 3