HP EliteDesk 705 G2 Maintenance and Service Guide - Page 66
Processor
View all HP EliteDesk 705 G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
CAUTION: Fan sink retaining screws should be tightened in diagonally opposite pairs (as in an X) to evenly seat the fan sink on the processor to avoid damage that could require replacing the system board. Failure to install the baffle may cause the computer to overheat. Processor Description AMD A10-8850B, 3.9 GHz AMD A10-8750B, 3.6 GHz AMD A10-7800B, 3.57 GHz AMD A8-8650B, 3.2 GHz AMD A8-7600B, 3.1 GHz AMD A6-8550B, 3.7 GHz AMD A6-8350B, 3.5 GHz AMD A4-7300B, 3.8 GHz 1. Prepare the computer for disassembly (Preparation for disassembly on page 19). 2. Remove the access panel (Access panel on page 20). 3. Rotate the drive cage to its upright position. 4. Rotate the small baffle into the upright position (Small baffle on page 47). 5. Remove the fan baffle (Fan baffle on page 48). 6. Remove the heat sink (Fan sink on page 55). 7. Rotate the locking lever to its full open position (1). 56 Chapter 4 Removal and replacement procedures - small form factor (SFF) chassis