HP EliteDesk 705 G2 Maintenance and Service Guide - Page 46
Removing and replacing a primary 3.5-inch hard drive, Prepare the computer for disassembly
View all HP EliteDesk 705 G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
7. Replace the front bezel if it was removed. 8. Replace the computer access panel. 9. If the computer was on a stand, replace the stand. 10. Reconnect the power cord and any external devices, and then turn on the computer. 11. Lock any security devices that were disengaged when the access panel was removed. Removing and replacing a primary 3.5-inch hard drive NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you can transfer the data to the new hard drive. 1. Prepare the computer for disassembly (Preparation for disassembly on page 19). 2. Remove the access panel (Access panel on page 20). 3. Disconnect the power cable (1) and data cable (2) from the back of the hard drive. 36 Chapter 4 Removal and replacement procedures - small form factor (SFF) chassis