HP EliteDesk 705 G2 Maintenance and Service Guide - Page 31
Front bezel security, standard screw locations.
View all HP EliteDesk 705 G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Front bezel security The front bezel can be locked in place by installing a security screw provided by HP. To install the security screw: 1. Prepare the computer for disassembly (Preparation for disassembly on page 19). 2. Remove the access panel (Access panel on page 20). 3. If you do not have a 6-32 standard screw, remove one of the four silver 6-32 standard screws located on top of the drive cage. Refer to Installing and Removing Drives on page 32 for an illustration of the 6-32 standard screw locations. 4. Install the 6-32 security screw through the middle front bezel release tab to secure the front bezel in place. 5. Replace the computer access panel. 6. If the computer was on a stand, replace the stand. 7. Reconnect the power cord and any external devices, and then turn on the computer. 8. Lock any security devices that were disengaged when the access panel was removed. Front bezel security 21