HP EliteDesk 705 G2 Maintenance and Service Guide - Page 36
Expansion card
View all HP EliteDesk 705 G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Expansion card Description nVIDIA GT730 Grayling 2 GB DDR3 PCIex8 USB 3.1 Type Cx1 PCIe x1 card Printer port, PCI card Serial port, PCI card PCIe to M.2 adapter Intel PRO/1000 NIC WLAN 802.11 a/b/g/n + Bluetooth 4.0 module WLAN 802.11 (7265NV) a/b/g/n 2x2 + Bluetooth 4.0 module WLAN 802.11 (7265AN) a/b/g/n 2x2 WLAN module caddy card + Bluetooth M.2 USB cable Wireless antenna for use with WLAN modules The computer has two PCI Express x1 expansion sockets, one PCI Express x16 expansion socket, and one PCI Express x16 expansion socket that is downshifted to a x4 socket. NOTE: The PCI Express sockets support only low profile cards. You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16 socket. For dual graphics card configurations, the first (primary) card must be installed in the PCI Express x16 socket that is NOT downshifted to a x4. To remove, replace, or add an expansion card: 1. Prepare the computer for disassembly (Preparation for disassembly on page 19). 2. Remove the access panel (Access panel on page 20). 3. Locate the correct vacant expansion socket on the system board and the corresponding expansion slot on the back of the computer chassis. 26 Chapter 4 Removal and replacement procedures - small form factor (SFF) chassis