HP EliteOne 800 Maintenance & Service Guide HP EliteOne 800 G1 All-in-One - Page 107
Front bezel and display panel
View all HP EliteOne 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Front bezel and display panel Description Front bezel Assembly kit for non-touchscreen models without a webcam (includes webcam cover for bezel) Assembly kit for touchscreen models without a webcam (includes webcam cover for bezel) Touch panel kit, with integrated touch glass Display panel - non-touchscreen models Plastic frame for models with a webcam (does not include glass) Spare part number 733500-001 733510-001 733511-001 735208-001 735207-001 733507-001 The front bezel is located on the front of the computer and is secured to the main system frame with 18 Torx screws. Replacement bezels include the webcam shutter and capacitive sensor board. On models that do not include a webcam, you must remove the shutter and install the webcam cover (Assembly kit) into the slot in which the webcam would be installed. Display panels require a backlight cable specific to the manufacturer. Make sure you use the backlight cable packaged with the display panel. To remove the front bezel: 1. Remove the stand (see Stand on page 37). 2. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 35). 3. Remove the access panel (see Access panel on page 41). 4. Remove the optical drive (see Replacing the optical disc drive on page 48). 5. Remove the top rear trim (see Top rear trim on page 69). 6. Remove the lower rear panel (see Lower rear panel on page 74). 7. Remove the side panels (see Side panels on page 92). 8. Remove the speakers (see Speakers on page 78). 9. Remove the power button board (see Power button board on page 94). 10. Remove the Torx screws that secure the bezel to the main system frame assembly, as follows: ● 18 total screws: ◦ Left: 5 screws ◦ Top: 5 screws ◦ Right 5 screws ◦ Bottom: 3 screw Front bezel and display panel 97