HP EliteOne 800 Maintenance & Service Guide HP EliteOne 800 G1 All-in-One - Page 56
Installing a 2.5-inch hard disc drive, To install a secondary hard disc drive
View all HP EliteOne 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Installing a 2.5-inch hard disc drive 1. Insert the 2.5-inch hard disc drive into the drive cage. ● To install a primary hard disc drive, insert the drive into the lower position in the drive cage. Be sure to insert the end with the connectors first. NOTE: The primary drive is the lower position in the drive cage. If only one drive is to be installed, it must occupy this position. ● To install a secondary hard disc drive, set the drive into the upper tray of the drive cage. Be sure the connectors are facing the same direction as the connectors of the primary hard disc drive. 2. Fasten the lower 2.5-inch hard disc drive securely into the drive cage with four mounting screws with grommets. 46 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis