HP EliteOne 800 Maintenance & Service Guide HP EliteOne 800 G1 All-in-One - Page 93
disconnecting/connecting the cables to avoid breaking the connectors on the board
View all HP EliteOne 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
5. While the board/holder assembly is installed, remove the plastic holder from the board. 6. Lift the board enough to gain access to the connectors. 7. Disconnect the cables from the board. NOTE: The cables and connectors on this board are small and fragile. Use care when disconnecting/connecting the cables to avoid breaking the connectors on the board, . To install the NFC sensor board, reverse the removal procedures. NFC sensor board 83
5.
While the board/holder assembly is installed, remove the plastic holder from the board.
6.
Lift the board enough to gain access to the connectors.
7.
Disconnect the cables from the board.
NOTE:
The cables and connectors on this board are small and fragile. Use care when
disconnecting/connecting the cables to avoid breaking the connectors on the board, .
To install the NFC sensor board, reverse the removal procedures.
NFC sensor board
83