HP EliteOne 800 Maintenance & Service Guide HP EliteOne 800 G1 All-in-One - Page 47
Stand, Height-adjustable/recline stand (optional), WARNING
View all HP EliteOne 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Stand Description Tilt/swivel stand Height adjustment stand Spare part number 732509-001 698226-001 Two stands are available for the computer: ● Height-adjustable/recline stand ● Tilt/swivel stand Height-adjustable/recline stand (optional) To remove the stand: 1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 35). 2. Place the computer face down on a soft flat surface. HP recommends that you set down a blanket, towel, or other soft cloth to protect the bezel and screen surface from scratches or other damage. WARNING! Before laying the computer down for service, first grasp the sides of the display and raise the display to the highest position. Do not lay the computer down with the sliding stand in the low position. The stand may suddenly release, which could cause injury or damage to equipment. Stand 37