HP EliteOne 800 Maintenance & Service Guide HP EliteOne 800 G1 All-in-One - Page 99
Remove the eight remaining Torx screws that secure the system board to the computer.
View all HP EliteOne 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
10. Remove the graphics board (see Graphics board on page 67). 11. Remove the WLAN module (see WLAN module on page 57). 12. Disconnect all cables from the system board, noting their location for reinstallation. 13. Remove the side bracket by removing the two Torx screws (1), and then rotating the bracket to remove it (2). 14. Remove the eight remaining Torx screws that secure the system board to the computer. 15. Position the cables on the side of the board out of the way so you can freely slide the board out of the computer. System board 89
10.
Remove the graphics board (see
Graphics board
on page
67
).
11.
Remove the WLAN module (see
WLAN module
on page
57
).
12.
Disconnect all cables from the system board, noting their location for reinstallation.
13.
Remove the side bracket by removing the two Torx screws
(1)
, and then rotating the bracket to
remove it
(2)
.
14.
Remove the eight remaining Torx screws that secure the system board to the computer.
15.
Position the cables on the side of the board out of the way so you can freely slide the board out of
the computer.
System board
89