HP EliteOne 800 Maintenance & Service Guide HP EliteOne 800 G1 All-in-One - Page 192
Control panel message, Description, Recommended action, Management Engine ME BIOS Extensions
View all HP EliteOne 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Control panel message 1801-Microcode Patch Error 2200-PMM Allocation Error during MEBx Download 2201-MEBx Module did not checksum correctly 2202-PMM Deallocation Error during MEBx cleanup 2203-Setup error during MEBx execution Description Processor is not supported by ROM BIOS. Memory error during POST execution of the Management Engine (ME) BIOS Extensions option ROM. Memory error during POST execution of the Management Engine (ME) BIOS Extensions option ROM. Memory error during POST execution of the Management Engine (ME) BIOS Extensions option ROM. MEBx selection or exit resulted in a setup failure. Recommended action 1. Upgrade BIOS to proper version. 2. Change the processor. 1. Reboot the computer. 2. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the computer, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 1. Reboot the computer. 2. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 1. Reboot the computer. 2. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 1. Reboot the computer. 2. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 182 Chapter 10 POST error messages