HP EliteOne 800 Maintenance & Service Guide HP EliteOne 800 G1 All-in-One - Page 96
Power supply - vesa
View all HP EliteOne 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Power supply Description Power supply, 200W Spare part number 733490-001 The power supply is located in the middle of the computer under the VESA mounting plate. It is secured with two Torx screws and has one connector routed to the system board. To remove the power supply: 1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 35). 2. Remove the stand (see Stand on page 37). 3. Remove the access panel (see Access panel on page 41). 4. Remove the lower rear panel (see Lower rear panel on page 74). 5. Disconnect the cable from the system board connector (1). 6. Remove the two Torx screws (2) that secure the power supply to the computer. 86 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis