HP Indigo 10000 HD Writing Head Service Document - Page 21

the strap and wind it back with the strap running from the end of the arm over the top

Page 21 highlights

b. Make sure that the Crane strap orientation is correct: i. The correct orientation of the strap is over the top of the motor reel. ii. If the strap winds around the reel in the opposite direction, the crane will not fuction correctly (IN will lower the strap and OUT will raise the strap). You must completely un-reel the strap and wind it back with the strap running from the end of the arm over the top of the reel. WARNING! Do not run motor in excess of 4 min. For every minute of operation, allow 5 minutes of cool-down time. 29. Place the empty WH box next to the press with the orientation shown below. Do not attempt to place the box and lift the WH in a different orientation than shown. Removing the HD writing head 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105

b.
Make sure that the Crane strap orientation is correct:
i.
The correct orientation of the strap is
over the top
of the motor reel.
ii.
If the strap winds around the reel in the opposite direction, the crane will not fuction
correctly (IN will lower the strap and OUT will raise the strap). You must completely un-reel
the strap and wind it back with the strap running from the end of the arm over the top of
the reel.
WARNING!
Do not run motor in excess of 4 min. For every minute of operation, allow 5
minutes of cool-down time.
29.
Place the empty WH box next to the press with the orientation shown below.
Do not attempt to place the box and lift the WH in a different orientation than shown.
Removing the HD writing head
19