HP Indigo 10000 HD Writing Head Service Document - Page 87
Disconnect the sensor's cable., Replace and install the new sensor.
View all HP Indigo 10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
n. Once it's aligned, tightened all 8 screws - 2 locking screws and 6 beam screws. 2. Sensor (p/n 1990-4589) a. Open 2 screws of the sensor. b. Disconnect the sensor's cable. c. Replace and install the new sensor. 3. Front / Rear Wiring (p/n CA461-25702) Replacing the spare parts 85
n.
Once it’s aligned, tightened all 8 screws - 2 locking screws and 6 beam screws.
2.
Sensor (p/n 1990-4589)
a.
Open 2 screws of the sensor.
b.
Disconnect the sensor’s cable.
c.
Replace and install the new sensor.
3.
Front / Rear Wiring (p/n CA461-25702)
Replacing the spare parts
85