HP Indigo 10000 HD Writing Head Service Document - Page 57
Troubleshooting the HD writing head, Standby, Ready, Print Mode
View all HP Indigo 10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
10. Reconnect the middle Molex connector at the WH heater panel bracket. 11. Insert the pars shuttle. 12. Insert the Charge roller unit. 13. Reinstall the Pip IR sensor bracket. Troubleshooting the HD writing head Follow these steps to troubleshoot the HD writing head. NOTE: The WH must be in Standby, Ready, or Print Mode for at least 1½ hours before performing any WH calibrations. 1. HD WH Print care diagnostics and Elements activation: Troubleshooting the HD writing head 55
10.
Reconnect the middle Molex connector at the WH heater panel bracket.
11.
Insert the pars shuttle.
12.
Insert the Charge roller unit.
13.
Reinstall the Pip IR sensor bracket.
Troubleshooting the HD writing head
Follow these steps to troubleshoot the HD writing head.
NOTE:
The WH must be in
Standby
,
Ready
, or
Print Mode
for at least 1½ hours before performing any
WH calibrations.
1.
HD WH Print care diagnostics and Elements activation:
Troubleshooting the HD writing head
55