HP Indigo 10000 HD Writing Head Service Document - Page 86
Insert a 5mm Allen key in the alignment pin hole as shown below.
View all HP Indigo 10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
j. Tighten the 4 screws - The tension indicator should be when the 4 screws are at the slots middle position. k. Reinstall motor assembly on the press. l. Install (Do not tighten) 8 screws - 2 locking screws and 6 beam screws. m. Insert a 5mm Allen key in the alignment pin hole as shown below. NOTE: Make sure that the key enters all the way in the alignment hole. If it does not - gently move the unit sideways to align it. 84 Appendix D Appendix D - HD writing head spare parts
j.
Tighten the 4 screws - The tension indicator should be when the 4 screws are at the slots
middle position.
k.
Reinstall motor assembly on the press.
l.
Install (Do not tighten) 8 screws - 2 locking screws and 6 beam screws.
m.
Insert a 5mm Allen key in the alignment pin hole as shown below.
NOTE:
Make sure that the key enters all the way in the alignment hole. If it does not – gently
move the unit sideways to align it.
84
Appendix D
Appendix D - HD writing head spare parts