HP LH4r HP Netserver LH 3/3r User Guide - Page 20
Replacing the HP NetServer LH 3 Covers, Removing the HP NetServer LH 3r Covers
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 3 Removing and Replacing Covers Cover 2 Remove cover 2 by unscrewing the thumbscrew, pulling the cover forward and then slightly sideways to disengage it. Lift it up and away from the chassis. Cover 3 Remove cover 3 by unscrewing the thumbscrew and pulling it forward to disengage it. Lift it outward and away from the chassis. Replacing the HP NetServer LH 3 Covers CAUTION Replace all covers before operating this NetServer, even for a short time. Otherwise, damage to system components may result due to improper cooling air flow. Insert the tabs inside the rear of the cover into the slots at the rear of the chassis and slide the cover toward the rear. Tighten the thumbscrew at the front of the cover. Removing the HP NetServer LH 3r Covers To remove the covers, first remove the bezel from the front of the NetServer. Bezel The bezel has three clips that mount onto a hinge assembly, which is secured to the NetServer chassis. To remove the bezel, simply pull it toward you until it comes free. 12