HP LH4r HP Netserver LH 3000/3000r to LH 6000/6000r Upgrade Guide - Page 12

Chapter 2 Preparing for the Upgrade b. Copy down all settings from the Configuration and Security menus that you might have changed from their default values. Be sure to write down the settings under these selections: ∗ Embedded LAN and SCSI Settings ∗ Boot Settings See your NetServer's Installation Guide for more information about the Setup utility. 3. If you are using integrated HP NetRAID, start the HP NetRAID Express Tools utility and write down all configuration details for integrated HP NetRAID as follows: a. Restart your NetServer and watch for the flashing message: Option: Experienced users may press for HP NetRAID Express Tools now. Firmware Initializing b. Press or to start HP NetRAID Express Tools. c. From the Tools Management menu, choose Enable/Disable BIOS and write down the setting. d. Select the Objects menu, then choose Adapter. e. If you are using the integrated HP NetRAID, and don't have any additional HP NetRAID adapters, write down all the adapter settings. If you are using multiple HP NetRAID adapters, select your adapters one at a time, and look for "Integrated HP NetRAID Controller" in the Type field. When you have selected the integrated NetRAID adapter, write down all the adapter settings. f. From the Objects menu, select Logical Drives then Properties. Write down all logical drive settings. g. From the Objects menu, select SCSI Channel and write down settings for each channel. h. Exit HP NetRAID Express Tools. 4. If you are using the Integrated Remote Assistant features, run the Integrated Remote Assistant. Record all configuration settings. 8