HP LH4r HP Netserver LH 3000/3000r to LH 6000/6000r Upgrade Guide - Page 25
remove the module and repeat Steps 3 through 5.
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Chapter 4 Installing LH 6000/6000r Components 5. Press the DIMM into the socket. The retaining clips close automatically if it is inserted properly. See Figure 4-3. CAUTION Do not rock the DIMM into place, but apply firm and even pressure directly downward. If the retaining clips do not close, remove the module and repeat Steps 3 through 5. 6. Add the second DIMM of the pair in the other bank of DIMM sockets. 7. Add other pairs of DIMMs as necessary. After inserting one DIMM, always insert the second DIMM of the pair. Figure 4-3. Insert DIMMs in System Board 21
Chapter 4
Installing LH 6000/6000r Components
21
5.
Press the DIMM into the socket. The retaining clips close automatically if
it is inserted properly. See Figure 4-3.
CAUTION
Do not rock the DIMM into place, but apply firm and even
pressure directly downward
. If the retaining clips do not close,
remove the module and repeat Steps 3 through 5.
6.
Add the second DIMM of the pair in the other bank of DIMM sockets.
7.
Add other pairs of DIMMs as necessary.
After inserting one DIMM,
always insert the second
DIMM of the pair.
Figure 4-3. Insert DIMMs in System Board