HP LH4r HP Netserver LXr Pro8 User Guide - Page 10
Power up the HP NetServer. Refer
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Chapter 1 Setting Up the HP NetServer LXr Pro8 3. Store the empty boxes and packing material in a safe place. This is especially important if you plan to ship the HP NetServer elsewhere for final installation. 4. If you have options to add to the HP NetServer's satellite chassis (memory, accessory boards, processor boards), remove the appropriate access panels from the satellite. (Refer to Chapter 3.) 5. Install additional memory or memory boards in the satellite chassis. (Refer to Chapter 5.) 6. Install PCI accessory boards in the satellite chassis. (Refer to Chapter 6.) 7. Reconnect all internal cables in the satellite chassis, and reattach all covers and access panels. (Refer to Chapter 3.) 8. Install disk drives or tape drives in the base chassis. (Refer to Chapter 4.) 9. Familiarize yourself with the HP NetServer's controls, indicators, and ports. (Refer to Chapter 2.) 10. Your next step depends on when and where you plan to complete the installation process. ◊ Do you plan to install the HP NetServer in a rack now? If so, install the base chassis in the rack. (See Chapter 7.) Then reattach the satellite chassis to the base chassis (Chapter 3). Cable the monitor, keyboard, and mouse the HP NetServer (Chapter 8), and also connect mass storage, tape drives, and other components. ◊ Do you plan to complete configuration at another location? If so, put the base chassis back in the packing box. Then secure the satellite chassis to the base chassis, finish repacking, and ship the unit out. ◊ Do you plan to configure and test the HP NetServer and other components together without mounting them in the rack? If so, secure the satellite chassis to the base chassis (Chapter 3), and cable the HP NetServer to the monitor, keyboard, and mouse (Chapter 8). Also connect mass storage, tape drives, and other components. 11. Obtain the release history of the HP NetServer Navigator CD-ROM that came with your HP NetServer, to make sure that your Navigator CD-ROM is the latest. (Refer to Chapter 9.) 12. Power up the HP NetServer. (Refer to Chapter 2.) 2