HP LH4r HP Netserver LXr Pro8 User Guide - Page 57
Tools Required
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Chapter 6 Installing Additional Boards NOTE If you ever choose to remove one of the processor boards and run the HP NetServer with fewer processors, a terminator board must be installed in place of the processor board. • HP Navigator CD-ROM. You are not required to use the HP Navigator CD-ROM to reconfigure your system after installing the new processor board. However, we recommend that you use it to ensure that you have the latest drivers and information. Figure 6-3. 200 MHz/1MB Processor Board Tools Required • An antistatic service kit (3MTM 8501/8502/8503 or equivalent). This kit includes a static-dissipating work surface, a chassis clip lead, and a wrist strap. • Number 1 Phillips head screwdriver. 49
Chapter 6
Installing Additional Boards
49
NOTE
If you ever choose to remove one of the processor boards and
run the HP NetServer with fewer processors, a terminator
board must be installed in place of the processor board.
•
HP Navigator CD-ROM. You are not required to use the HP Navigator
CD-ROM to reconfigure your system after installing the new processor
board. However, we recommend that you use it to ensure that you have the
latest drivers and information.
Figure 6-3. 200 MHz/1MB Processor Board
Tools Required
•
An antistatic service kit (3M
TM
8501/8502/8503 or equivalent). This kit
includes a static-dissipating work surface, a chassis clip lead, and a wrist
strap.
•
Number 1 Phillips head screwdriver.