HP LH4r HP Netserver LXr Pro8 User Guide - Page 61
Terminator in Slot B1, Terminator in Slot B2, Processor Board in Slot A1, Terminator in Slot A2
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 6 Installing Additional Boards Terminator in Slot A2 Processor Board in Slot A1 Terminator in Slot B2 Terminator in Slot B1 Figure 6-4. Processor and Terminator Boards on the System Board 8. Using a Phillips head screwdriver, unscrew the two mounting screws that secure the terminator board in place. 9. Grasp the board you are removing, and lift firmly. Place it on the antistatic mat. 10. If you are installing more than one 200 MHz/1MB processor board, remove additional terminator boards as necessary. 53
Chapter 6
Installing Additional Boards
53
Terminator in Slot B1
Terminator in Slot B2
Processor Board in Slot A1
Terminator in Slot A2
Figure 6-4. Processor and Terminator Boards on the System Board
8.
Using a Phillips head screwdriver, unscrew the two mounting screws that
secure the terminator board in place.
9.
Grasp the board you are removing, and lift firmly. Place it on the
antistatic mat.
10.
If you are installing more than one 200 MHz/1MB processor board,
remove additional terminator boards as necessary.