HP LH4r HP Netserver LXr Pro8 User Guide - Page 30
Before putting the satellite back on the base chassis, make sure
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Chapter 3 Opening and Closing the HP NetServer 7. Both people must carefully pull the satellite chassis off the slides (Figure 3-5). Place the satellite carefully on a nearby work surface. Figure 3-5. Pulling the Satellite Chassis Off Its Slides 8. To replace the satellite chassis, move to the front of the server and unlatch all four power supplies. (If the front bezel is in place, remove it. See "Removing and Replacing the Front Bezel." Then make sure that the slides are locked in the fully-extended position behind the base chassis. NOTE Before putting the satellite back on the base chassis, make sure that the power interlock switch on the back of the base chassis is still in the unlocked position (Figure 2-6). Otherwise, you cannot slide the satellite all the way onto the base. 22