HP LaserJet 1005 HP LaserJet 1005 series printer - User Guide - Page 45

Printed is different than what appeared on screen, Printed problems, Problem, Solution - series printer drivers

Get HP LaserJet 1005 PDF manuals and user guides View all HP LaserJet 1005 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Printed page is different than what appeared on screen Printed page problems Problem Solution Garbled, incorrect, or incomplete text The printer cable might be loose or defective. Try the following: ● Try printing a job that you know works. ● If possible, attach the printer cable and printer to another computer, and try printing a job that you know works. ● Unplug the power cord, disconnect the printer cable at both ends, reconnect the printer cable at both ends, and plug the power cord back in. CAUTION Before you connect the cable to the printer, always unplug the printer. Otherwise, the printer might be damaged. The wrong printer driver might have been selected when the software was installed. Make sure that HP LaserJet 1005 Series Printer is selected in the printer properties. There might be a problem with the software application. Try printing from another software application. Missing graphics or text, or blank pages ● Make sure that the file does not contain blank pages. ● The sealing tape might still be in the print cartridge. Remove the print cartridge, and pull out the sealing tape. Reinstall the print cartridge. See Changing the print cartridge for instructions. ● The graphic settings in the printer properties might not be correct for the type of job that you are printing. Try a different graphic setting in the printer properties. See Printer properties (driver) for more information. Page format is different than on another printer If you used an older or different printer driver (printer software) to create the document or the printer properties settings in the software are different, the page format might change when you try to print using the new printer driver or settings. To help eliminate this problem, change the resolution, media size, font settings, and other settings. See Printer properties (driver) for more information. Graphics quality The graphic settings might be unsuitable for the print job. Check the graphic settings, such as resolution, in the printer properties and adjust them as necessary. See Printer properties (driver) for more information. ENWW Finding the solution 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
ENWW
Finding the solution 43
Printed page is different than what appeared on screen
Printed page problems
Problem
Solution
Garbled, incorrect, or incomplete text
The printer cable might be loose or defective. Try the following:
●
Try printing a job that you know works.
●
If possible, attach the printer cable and printer to another
computer, and try printing a job that you know works.
●
Unplug the power cord, disconnect the printer cable at both ends,
reconnect the printer cable at both ends, and plug the power cord
back in.
CAUTION
Before you connect the cable to the printer, always unplug the printer.
Otherwise, the printer might be damaged.
The wrong printer driver might have been selected when the software
was installed. Make sure that HP LaserJet 1005 Series Printer is
selected in the printer properties.
There might be a problem with the software application. Try printing
from another software application.
Missing graphics or text,
or blank pages
●
Make sure that the file does not contain blank pages.
●
The sealing tape might still be in the print cartridge. Remove the
print cartridge, and pull out the sealing tape. Reinstall the print
cartridge. See
Changing the print cartridge
for instructions.
●
The graphic settings in the printer properties might not be correct
for the type of job that you are printing. Try a different graphic
setting in the printer properties. See
Printer properties (driver)
for
more information.
Page format is different than on
another printer
If you used an older or different printer driver (printer software) to
create the document or the printer properties settings in the software
are different, the page format might change when you try to print
using the new printer driver or settings. To help eliminate this problem,
change the resolution, media size, font settings, and other settings.
See
Printer properties (driver)
for more information.
Graphics quality
The graphic settings might be unsuitable for the print job. Check the
graphic settings, such as resolution, in the printer properties and
adjust them as necessary. See
Printer properties (driver)
for more
information.