HP LaserJet 1005 HP LaserJet 1005 series printer - User Guide - Page 58
Changing the printer separation pad, With one hand, reach in through the opening, and push
View all HP LaserJet 1005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Changing the printer separation pad 1 Note Before you change the separation pad, clean the pickup roller. See Cleaning the pickup roller for instructions. If the paper input tray feeds more than one page at a time, you might need to change the printer separation pad. Recurring feed problems indicate that the printer separation pad is worn. See Accessories and ordering 2 information to order a new printer separation pad. 1 Unplug the power cord from the printer, and allow the printer to cool. 2 Remove the paper input tray. 3 Find the blue separation pad. 4 To pry the separation pad up from the spring-loaded base, insert a flat-edged screwdriver in the slot under the separation pad, and twist until the tabs are free. 3 5 With one hand, reach in through the opening, and push the spring-loaded base down (A). With the other hand, pull the separation pad up (B). 6 With one hand, position the new separation pad in the slot of the previous separation pad (A). With the other hand, reach through the paper input tray opening, and push the spring-loaded base down (B). 4 Note The tab on the right is larger to help you position it correctly. Continued on next page. 5 6 56 Chapter 6 Troubleshooting the printer ENWW