HP LaserJet 1005 HP LaserJet 1005 series printer - User Guide - Page 52

Cleaning the printer media path, Con Start, Cleaning

Get HP LaserJet 1005 PDF manuals and user guides View all HP LaserJet 1005 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Cleaning the printer media path If you are experiencing toner specks or dots on the printouts, you can use the HP LaserJet cleaning utility to remove excess media and toner particles that can accumulate on the fuser assembly and rollers. Cleaning the media path might extend the life of the printer. Note For best results use a sheet of transparency. If you do not have any transparencies, you can use copier grade media (18 to 24 lb. or 70 to 90 g/m2) with a smooth surface. 1 Make sure that the printer is idle and the Ready light is on. 2 Load the media in the paper input tray. 3 Access the printer properties. See Printer properties (driver) for instructions. Click the Configure tab, and click Start in Cleaning Page. The cleaning process takes approximately 2 minutes. 50 Chapter 6 Troubleshooting the printer ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
50
Chapter 6 Troubleshooting the printer
ENWW
Cleaning the printer media path
If you are experiencing toner specks or dots on the printouts, you can use the HP LaserJet
cleaning utility to remove excess media and toner particles that can accumulate on the fuser
assembly and rollers. Cleaning the media path might extend the life of the printer.
Note
For best results use a sheet of transparency. If you do not have any transparencies, you can use copier
grade media (18 to 24 lb. or 70 to 90 g/m
2
) with a smooth surface.
1
Make sure that the printer is idle and the Ready light is on.
2
Load the media in the paper input tray.
3
Access the printer properties. See
Printer properties (driver)
for instructions. Click the
Configure
tab, and click
Start
in
Cleaning Page
.
The cleaning process takes approximately 2 minutes.