HP LaserJet M5000 HP LaserJet M5025/M5035 MFP - Software Technical Reference ( - Page 306
Remote firmware update by using FTP on a direct network connection
View all HP LaserJet M5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 306 highlights
Engineering Details Remote firmware update by using FTP on a direct network connection If the HP LaserJet M5025/M5035 MFP uses a direct network connection, use file transfer protocol (FTP) to update the firmware. Complete the following steps: 1. Make note of the TCP/IP address on the HP Embedded Jetdirect page. The HP Embedded Jetdirect page is the second page of the configuration page printout. To print a configuration page, see Print the configuration page . NOTE Before connecting to the device, make sure that the device is not in Powersave mode. Also make sure that any error messages are cleared from the control-panel display. 2. Open a command window on the computer. 3. Type ftp://. For example, if the TCP/IP address is 192.168.0.90, type ftp://192.168.0.90. 4. Press Enter on the keyboard. 5. When prompted for the user name, press Enter. 6. When prompted for the password, press Enter. 7. Type bin at the command prompt. 8. Press Enter. The message 200 Type set to I, Using binary mode to transfer files appears in the command window. 9. Type put , where is the name of the .RFU file that was downloaded from the Web, including the path. For example, type put C:\LJ\xxxxFW.RFU, and then press Enter. NOTE If the file name or path includes a space, you must enclose the file name or path in quotation marks. For example, type the following path: put "c:\My Documents\LJ\xxxxfw.rfu" The following series of messages appears in the command window: 200 PORT command successful 150 Opening BINARY mode data connection 226 Ready 226 Processing Job 226 Transfer complete After these messages appear, a message containing transfer-speed information appears. 10. The download process begins and the firmware is updated on the device. This can take several minutes. Let the process finish without further interaction with the device or the computer. The messages described in the section Printer messages during the firmware update appear on the control panel. 286 Chapter 7 Engineering Details ENWW