HP LaserJet M9040/M9050 HP LaserJet M9040/M9050 MFP - Software Technical Refer - Page 71
Install Windows software for networks
View all HP LaserJet M9040/M9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Installing Windows printing-system components Install Windows software for networks NOTE: For detailed installation instructions, see Detailed Microsoft Windows installation instructions on page 54. The software on the HP LaserJet M9040 MFP and HP LaserJet M9050 MFP CD-ROM supports network installation with a Microsoft network. For network installation on other operating systems, go to www.hp.com/support/ljm9040mfp or www.hp.com/support/ljm9050mfp. The installer does not support product installation or object creation on Novell servers. It supports only direct-mode network installations between Windows computers and a product. To install the product and create objects on a Novell server, use an HP utility (such as HP Web Jetadmin) or a Novell utility (such as NWAdmin). 1. Make sure that you have administrator privileges. 2. Make sure that the HP Jetdirect print server and product are correctly connected to the network. Print a configuration page, and find the HP Jetdirect page. To print a configuration page from the product control panel, perform the following: a. Touch Administration. b. Touch Information. c. Touch Configuration/Status Pages. d. Touch Configuration Page. e. Touch Print. NOTE: If the product contains an HP Jetdirect EIO print server or an optional hard disk drive, additional configuration pages print that provide information about those options. On the HPJetdirect page, locate the IP address that is currently configured. You might need this address to initially identify the product on your network and complete the installation. 3. Close all programs. 4. Insert the HP LaserJet M9040 MFP or HP LaserJet M9050 MFP software CD into the CD-ROM drive. The installer program should open. If the installer program has not started after 30 seconds, complete these steps: a. On the Start menu, click the Run option. b. Type the following: X:\SETUP.EXE (where X is the letter of the CD-ROM drive). c. Click the OK button. 5. When prompted, click the Install button. The printer driver screen appears. 6. Select the driver that you want to install and follow the instructions on the computer screen. 7. After the installation is complete, you might need to restart the computer. 8. Print a test page from any software program to make sure that the software is correctly installed. ENWW Microsoft Windows general installation overview 53