HP LaserJet Pro CP1025 Service Manual - Page 88
Cyan Cartridge Very Low, Front Access Door Open
View all HP LaserJet Pro CP1025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Alert message Cyan Cartridge Low Cyan Cartridge Very Low DC Controller Error Engine Communication Error Front Access Door Open Description Recommended action The Cyan Cartridge Low setting is customer configured on this product. If it is customer configured, the print cartridge is nearing the estimated end of its useful life. If a customer has configured this setting, the product indicates when a print cartridge level is low. Actual cartridge life remaining may vary. Consider having a replacement available to install when print quality is no longer acceptable. The print cartridge does not need to be replaced now. This alert displays only if the product is configured to stop when the print cartridge reaches the "very low" threshold. The print cartridge is at the estimated end of its useful life. Print quality may decrease. Choose a reminder option or replace print cartridge when quality becomes unacceptable. To ensure optimal print quality, HP recommends replacing the print cartridge at this point. You do not need to replace the print cartridge at this time unless print quality is no longer acceptable. Actual print cartridge life may vary. Once an HP print cartridge has reached "very low", HP's Premium Protection Warranty on that print cartridge has ended. All print defects or cartridge failures incurred when an HP supply is used in continue at very low mode will not be considered to be defects in materials or workmanship in the supply under the HP Print Cartridge Warranty Statement. The product has experienced an internal error. Turn off the product and disconnect the power cable from the product. Wait 30 seconds and then reconnect the power cord and turn on the product. Wait for the product to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Use the power button to turn on the product. If the problem persists, replace the engine controller assembly. The product experienced an internal communication error. Turn off the product and disconnect the power cable from the product. Wait 30 seconds and then reconnect the power cord and turn on the product. Wait for the product to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Use the power button to turn on the product. The door is open. Close the door. 72 Chapter 2 Solve problems ENWW