HP OmniBook 5500 HP OmniBook 5500 - User Guide, Windows 95 - Page 70
To set up the docking system
View all HP OmniBook 5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
To set up the docking system 1. Optional To adjust the typing angle of keyboard, you can connect the tilt legs to the docking system. Gently press inward on the tilt feet and snap on at one of the three height settings shown below. 2. Unplug the OmniBook's ac adapter and cables, then close the cable door. 3. Open the OmniBook's docking port door and slide the door under the port. 4. Plug the power cord into the ac adapter, then into a grounded ac outlet. Plug the connector from the ac adapter into the port on the back of the docking system. 70
70
To set up the docking system
1.
Optional
To adjust the typing angle of keyboard
,
you can connect the tilt legs to the
docking system. Gently press inward on the tilt feet and snap on at one of the
three height settings shown below.
2. Unplug the OmniBook’s ac adapter and cables, then close the cable door.
3. Open the OmniBook’s docking port door and slide the door under the port.
4. Plug the power cord into the ac adapter, then into a grounded ac outlet. Plug the
connector from the ac adapter into the port on the back of the docking system.