HP Scanjet 5000 User Guide - Page 124

Specifications, Environmental specifications, Mechanical specifications

Get HP Scanjet 5000 PDF manuals and user guides View all HP Scanjet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 124 highlights

12 Specifications Environmental specifications Specification Value Temperature range* - Operating 10° C to 35° C (50° F to 95° F) Non-operating -30° C to 60° C (-22° F to 140° F) Relative humidity (noncondensing) - Operating Minimum to be the higher (more moisture) of -12°C (10.4°F) dew point or 8% relative humidity Maximum to be 24°C (75.2°F) dew point or 90% relative humidity Non-operating 5% to 95% 38.7° C (101.7° F), maximum wet bulb temperature * All temperature ratings shown are for sea level. An altitude derating of 1.0° C per 304.8 m (1.8° F per 1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. Maximum rate of change is 20°C per hour (36°F per hour). The upper limit and rate of change might be limited by the type and number of options installed. For certain approved hardware configurations, the supported system inlet temperature range is extended: ● 5°C to 10°C (41°F to 50°F) and 35°C to 40°C (95°F to 104°F) at sea level with an altitude derating of 1.0°C per every 175 m (1.8°F per every 574 ft) above 900 m (2953 ft) to a maximum of 3048 m (10,000 ft). ● 40°C to 45°C (104°F to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft) above 900 m (2953 ft) to a maximum of 3048 m (10,000 ft). The approved hardware configurations for this system are listed on the HP website http://www.hp.com/go/ proliant/ASHRAE. Mechanical specifications Specification Height Depth, SFF Width Weight (maximum-all SFF drives) Value 8.73 cm (3.44 in) 67.94 cm (26.75 in) 44.54 cm (17.54 in) 14.7 kg (32.6 lb) *The SFF configuration includes the following components: ● SFF drive (1) ● Drive blanks (7) 116 Chapter 12 Specifications

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
12
Specifications
Environmental specifications
Specification
Value
Temperature range*
—
Operating
10° C to 35° C (50° F to 95° F)
Non-operating
-30° C to 60° C (-22° F to 140° F)
Relative humidity (noncondensing)
—
Operating
Minimum to be the higher (more moisture) of -12°C (10.4°F) dew point or 8%
relative humidity
Maximum to be 24°C (75.2°F) dew point or 90% relative humidity
Non-operating
5% to 95%
38.7° C (101.7° F), maximum wet bulb temperature
* All temperature ratings shown are for sea level. An altitude derating of 1.0° C per 304.8 m (1.8° F per 1,000 ft) to 3048 m (10,000 ft)
is applicable. No direct sunlight allowed. Maximum rate of change is 20°C per hour (36°F per hour). The upper limit and rate of change
might be limited by the type and number of options installed.
For certain approved hardware configurations, the supported system inlet temperature range is extended:
●
5°C to 10°C (41°F to 50°F) and 35°C to 40°C (95°F to 104°F) at sea level with an altitude derating of 1.0°C
per every 175 m (1.8°F per every 574 ft) above 900 m (2953 ft) to a maximum of 3048 m (10,000 ft).
●
40°C to 45°C (104°F to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per
every 410 ft) above 900 m (2953 ft) to a maximum of 3048 m (10,000 ft).
The approved hardware configurations for this system are listed on the HP website
go/
proliant/ASHRAE
.
Mechanical specifications
Specification
Value
Height
8.73 cm (3.44 in)
Depth, SFF
67.94 cm (26.75 in)
Width
44.54 cm (17.54 in)
Weight (maximum—all SFF drives)
14.7 kg (32.6 lb)
*The SFF configuration includes the following components:
●
SFF drive (1)
●
Drive blanks (7)
116
Chapter 12
Specifications