HP Scanjet 5000 User Guide - Page 89
HP Smart Storage Battery
View all HP Scanjet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
8. Install the air baffle. 9. Install the access panel (see Installing the access panel on page 18). 10. Slide the server into the rack. 11. Connect each power cord to the server. 12. Connect each power cord to the power source. 13. Before powering on the system, be sure the HP Smart Storage Battery is installed (see HP Smart Storage Battery on page 81). 14. Power up the server (see Powering up the server on page 16). HP Smart Storage Battery To install the component: 1. Power down the server (see Powering down the server on page 16). 2. Remove all power: a. Disconnect each power cord from the power source. b. Disconnect each power cord from the server. 3. Do one of the following: ● Extend the server from the rack (see Extending the server from the rack on page 17). ● Remove the server from the rack (see Removing the server from the rack on page 17). 4. Remove the access panel (see Removing the access panel on page 18). 5. Remove the air baffle (see Removing the air baffle on page 25). 6. Remove the fan cage (see Removing the fan cage on page 20). 7. Install the HP Smart Storage battery. HP Smart Storage Battery 81