HP Scanjet 5000 User Guide - Page 63
Installing an expansion board, Install the PCI riser cate see
View all HP Scanjet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Installing an expansion board 1. Power down the server (see Powering down the server on page 16). 2. Remove all power: a. Disconnect each power cord from the power source. b. Disconnect each power cord from the server. 3. Do one of the following: ● Extend the server from the rack (see Extending the server from the rack on page 17). ● Remove the server from the rack (see Removing the server from the rack on page 17). 4. Remove the access panel (see Removing the access panel on page 18). 5. Remove the PCI riser cage (see Removing the PCI riser cage on page 22). 6. Remove the expansion slot blank (see Removing an expansion slot blank on page 53). 7. Install the expansion board. 8. Connect any required internal or external cables to the expansion board. See the documentation that ships with the expansion board. 9. Install the PCI riser cate (see Installing the PCI riser cage on page 23). 10. Install the access panel (see Installing the access panel on page 18). 11. Install the server into the rack (Installing the server into the rack on page 30). 12. Connect each power cord to the server. 13. Connect each power cord to the power source. 14. Power up the server (see Powering up the server on page 16). Expansion board options 55